RB26 PLUS FORGED HKS 87mm PISTONS

Status
Not open for further replies.
Engine and Performance

RB26 PLUS FORGED HKS 87mm PISTONS

gobiz

500 RPM
Senior Member
May 16, 2004
926
29
3,028
KL
Visit site
A lot of people have been waiting for this :biggrin: so here it is :idea:
------------------------------------------------
1. RB26 BLOCK from early R32 (strong casting plus many heat cycles)
2. HKS 87mm FORGED PISTONS (block has been bored to fit)
3. Stock RB26 crank
4. Stock RB26 connecting rods
5. Stock RB26 water pump
6. RB26 oil pump (brand to be confirmed)

ALL ABOVE IN ONE ASSEMBLY. DOES NOT INCLUDE OIL SUMP BUT MY MECHANIC HAS ONE SPARE & OIL SUMPS ARE CHEAP AND EASY TO FIND FOR RB25/26 ENGINE.

WHEN TAKEN OUT ENGINE WAS IN GOOD RUNNING CONDITION, NO WHITE SMOKE.

ALL ABOVE FOR THE INSANELY CHEAP PRICE OF RM6066.66 :adore:
---------------------------------------------------

7. RB26 HEAD from R33 GTR
8. Stock RB26 CAMS
9. Throttle body assembly
(NO INTAKE PLENUM)

HEAD in good condition with no cracks seen, cams are straight.






ALL ABOVE FOR THE INSANELY CHEAP PRICE OF RM1888.88 :adore:

---------------------------------------------------

10. RB26 CAM, 2x ROCKER, COILPACK COVERS FROM UK-SPEC R34 GTR
COLOUR IN ORIGINAL MAROON RED

In VERY GOOD CONDITION




ALL THIS FOR THE INSANELY CHEAP PRICE OF RM1555.55 :adore:

PM ME YAAAA :love::love::love:
 
Last edited:

Temujin

1,000 RPM
Senior Member
Nov 5, 2004
1,474
619
5,213
Selangor
Visit site
Itu dia, hantu sudah keluar.. hahaha..

gobiz, so ur gonna put back the black r32 covers? or do u have sumthing up ur sleeves? :biggrin:

btw, are the RB30 cam + rocker + coil covers the same with RB26?
 

gobiz

500 RPM
Senior Member
Thread starter
May 16, 2004
926
29
3,028
KL
Visit site
Pictures of block:




Standard rb26 oil and water pump included:


 
Status
Not open for further replies.

Random Post Every 5 Minutes

compare this two pump
80l/h @ 0.3bar
60l/h @ 3bar
for injection application,which is better?
pressure is more important or the l/h?
wat if a car is fit with a 60l/h @ 3 bar internal pump in fuel tank and connect to a 80l/h @ 0.3 bar external pump near the engine bay after the fuel filter?
is it good?
or wat if from in tank pump tee-off
-one connect to engine (as original connection)
-one connect to external pump then to engine(need a check valve or not for this connection after tee-off and...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience