Proton 4G13/4G15....Satria/Wira/Saga

[azrin95]

Hey guys, I'm new here driving Wira 1.5 AT.

My TB got a bit of a problem right now. My mechanic said that it got problem with sensor or what and now it is like useless. He mod it so that the car still can be drive but not sure how long it will last.

So the current condition is, during idle, if a/c off, the timing will go up and down, a bit jerking and exhaust sounded like poof poof. If a/c on, no problem. This is how my mechanic mod it.

Ur engine injection or carburator system.....if injection, old model(mitsubishi) or new model(siemen VDO).

If mitsubishi injection model, my guess, ur foreman has install FICD to stabalize the idle, but still the idle will happen like ur said...only normal when your on your acc.....

My guess only....

Just my 10 cents..

Lot of improve to everybody....Happy New Year to All.....

 

[afosz]

Ur engine injection or carburator system.....if injection, old model(mitsubishi) or new model(siemen VDO).

If mitsubishi injection model, my guess, ur foreman has install FICD to stabalize the idle, but still the idle will happen like ur said...only normal when your on your acc.....

My guess only....

Just my 10 cents..

Lot of improve to everybody....Happy New Year to All.....

Mine is injection '98, should be mitsubishi right ? The idle only happens when A/C off. If A/C on, the jerking while idle didn't feel that major.

 

[SkYwAlKeR]

Mine is injection '98, should be mitsubishi right ? The idle only happens when A/C off. If A/C on, the jerking while idle didn't feel that major.

use toyota ficd to control it lo..

 

[biz-da-tech]

yong,
1.3 block is not worth to bore... better get a 1.5 block instead... and the 1.3 cylinder liner is not thick enough

Hey bro. wat the stroker kit are suit for 4g15?

to upgrade 1.6CC?

some said 4g18p can mod plug & play all the stuff to 4g15p?

 

[drexchan]

biz, 4G18 stroker kit --> 4G15 block has been mentioned and tested countless time with no problem. I think guan did also mention it in this topic. That's what's in his block.

 

[SkYwAlKeR]

1.5L to 1.6cc dat one is downgrade mah...

 

[Dark_Knight]

hello everyone,

i'm going to own a wira 1.5 auto from my sis,
this car has unknown mileage and my sis barely service it,
any suggestion on what to change for a major service?

thx in advance

 

[boyzone]

1st, 1.5L auto is pretty high in FC.
If the engine condition is too bad, suggest to transplant the engine.
However, if the engine and gearbox condition is good, just change the engine oil and gear oil.
other is depand on the condition.

 

[Dark_Knight]

1st, 1.5L auto is pretty high in FC.
If the engine condition is too bad, suggest to transplant the engine.
However, if the engine and gearbox condition is good, just change the engine oil and gear oil.
other is depand on the condition.

thx for the reply,

erm, about engine condition...
so far no smoke coming out from exhaust,
but kinda noisy with mouse squeaking noise in cold start,
FC and power is kinda bad

so i'm wondering what else to change besides engine n gear oil to make it better

 

[SkYwAlKeR]

mouse squeeking need to check alternator belt liao..

 

[kenny81]

hello everyone.... could somebody help me.
i need a proper specialist tuning for my car..4g13p
my engine already done pnp and already added power coil but the engine still jerking.
anybody know any workshop that can solve my problem?

 

[Dark_Knight]

mouse squeeking need to check alternator belt liao..

ok, noted,
besides alternator belt, how about others belting, does pulley or any bearing need to be replaced?

 

[SkYwAlKeR]

ok, noted,
besides alternator belt, how about others belting, does pulley or any bearing need to be replaced?

yes... check and change if its damaged...

no need to usik timing belt... timing belt wont squeek...

 

[Dark_Knight]

yes... check and change if its damaged...

no need to usik timing belt... timing belt wont squeek...

ok, noted, thx bro

 

[mig29sqn]

hello guys...i'm new comers here...hope get something to learn about my ride from orang lama...