Evo 9MR Major Demod Sales

Status
Not open for further replies.
Engine and Performance

Evo 9MR Major Demod Sales

greenmivec

Known Member
Senior Member
Nov 10, 2005
341
126
1,543
Dear Zth

This is a major demod sales for my very own Evo 9MR. All parts are original and 95% of them were bought new. No cap ayam or itik parts in this sales thread. 2.3 stroker kit is very new. The piston is still in the box. This is for serious buyer only, no un educated question or low ballers will be entertained.
All price are negotiable. Please PM or whatssap me or your reasonable price.
Reason selling is to collect RM2.6 billion donation money :thefinger:

Head
1. GSC S2 Cam – RM1700[B/]
2. GSC Beehive Valve Spring and Titanium Retainer (bought new from US, run for only 1300km) – RM1,200
3. ARP Head Stud – RM450
4. Fidanza Titanium Cam Pulley-RM450

Total Cam Set : RM3,800

2.3 Stroker Kit
1. CP Piston 86.5mm (new, still in box)
2. Manley H-Beam 150mm Conrod (bought new from US, run for only 1300km)
3. Manley 100mm crankshaft (bought new from US, run for only 1300km)
4. ARP Main Stud (bought new from US, run for only 1300km)
5. Kings Bearing for Rod, Main, Thrust (bought new from US, run for only 1300km)
Total Stroker Kit Set : RM8,000
Option A: RM8,000. Stroker Kit Set only.
Option B: RM10,000. Installed Stroker Kit and Short block package : Fresh from machine shop my own Original Evo 9MR block. Machined for 86.5mm piston. Buyer will get a fully installed and balanced stroker kit set with block. Stroker kits were bought new from US, run for 1300km before the changing to new CP piston which is still new in box. Block comes with documents. Just plug and play to your car. Machine and balancing parts will cost around RM1000+.

Fuel System
1. Injector Dynamic High Z 1000cc injector –RM1,200
2. Fuel Rail Works – RM250
3. Turbosmart Fuel Pressure Regulator – RM500
4. Deutsh Werk (DW) 255 Fuel Pump – RM300

Turbo System
1. Tonka Manifold – RM1,100
2. Forced Performace (FP) HTA 3582 0.63 housing. – RM5,500
3. Tial 44mm wastegate – RM1,300
Turbo Pakcage – RM7,900.

4. Tial QR BOV – RM550
5. Greddy Spec R Intercooler – RM1,200
6. Blitz ZS Racing Aluminium Radiator – RM1,200
7. Works Manual Boost Controller. – RM150

Drive Train
1. Ogura Twin Plate Racing Clutch 559 series with bearing. (less than 20,000km run) – RM3,700

Tyre and Wheels
1. ADO8R 235/40/18
2. Advan RS rim
Total Rim and Tyre: RM6,700

3. Project U Slotted Rotor front and rear –RM3,300
4. M7 800*C high temp race brake pad- RM400
5. APP Steel Braided Brake Hose – RM350

Electronic
1. HKS EVC 6 – RM1,800
2. DEFI BF Advance Boost meter with control unit. (2+ months old) –RM1,000
3. Autronic SM4 Evo 9 Plug n Play ECU – RM4,500

Body Kit
1. Original Voltex Type 5 GT Wing with Voltex original extended support worth few hundred ringgit. Specially CNCed aluminium support base for greater durability and support. Original small base will be give too.
RM 1,800
2. Original Voltex front bumper with carnard. – RM2,300
3. Original Voltex CF diffuser.- RM1,500

Exhaust
1. Titanium Trust Pe- Tir 3" exhaust with decat pipe. The best exhaust and very rare. RM2,800


* All items to be COD at KL area and Kinrara Puchong. COD. No hutang or bayaran ansuran accepted.


Thank you
 

Attachments

Last edited:
Status
Not open for further replies.

Random Post Every 5 Minutes

Firsly i am a noob here,just on the process of learning,my question is i am going to bot on my kelisa,so can a safc II,safc-neo or e-manage tune back my ecu after i bot?some people told me safc cant tune it back and told me to use e-manage,so i need sifu sifu out there to help me on this,really confuse on this,so sifu sifu please help a noob here thank you very much :adore:
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience