What is the Perdana V6 (A) actual top speed?

[peeche]

what about manual ride?

6A12, i tried 200km but don't dare to go any further.
shaky, damn shaky..

actually it depends on your car conditions, such as lower arms, suspension and tyre.

 

[kurt_629]

actually it depends on your car conditions, such as lower arms, suspension and tyre.

what is perdana V6 horsepower, 6A12.

6A12 2000cc V6 24V is 180hp @ 7000 rpm.
6A12 2000cc V6 24V MIVEC is 200hp @ 7500 rpm.
6A12TT (twinturbo) is 2000cc V6 24V 240hp @ 6000rpm

correct?

 

[^pomen_GTR^]

what is perdana V6 horsepower, 6A12.

6A12 2000cc V6 24V is 180hp @ 7000 rpm.
6A12 2000cc V6 24V MIVEC is 200hp @ 7500 rpm.
6A12TT (twinturbo) is 2000cc V6 24V 240hp @ 6000rpm

correct?

the 2.0 v6 non mivec is around that but i think on lower side



Mitsubishi 6A1 engine - Wikipedia, the free encyclopedia

for perdana even lower...around 140hp

Proton Perdana (first generation) - Wikipedia, the free encyclopedia

 

[kurt_629]

mine is year 2k, if so, its only 148bhp.

 

[DanzEterna]

twin turbo has 2 models
1. black meter - 220hp
2. white meter, RS version 240hp.

but not much difference also, the white meter aka RS model halfcut costs more than the normal v6tt.

just add a emanage blue onto your black meter ecu then u can get 240hp edi :proud:

 

[peeche]

mine is year 2k, if so, its only 148bhp.

148bhp with a lot of potential.

 

[kurt_629]

148bhp with a lot of potential.

like what?

i done my exhaust..
on 17' wheels,
change new set of absorber and spring, not coilover as still need to ferry in law.
added stiff ring.

like nothing much to do..

but i'm looking for anti roll bar, 19mm, rear.
TT to convert my 6A12 to turbo
unichip, emanage if anyone selling, let me know..

 

[YYC]

like what?

i done my exhaust..
on 17' wheels,
change new set of absorber and spring, not coilover as still need to ferry in law.
added stiff ring.

like nothing much to do..

but i'm looking for anti roll bar, 19mm, rear.
TT to convert my 6A12 to turbo
unichip, emanage if anyone selling, let me know..

I intend to let go my 19mm rear ARB. reason because I don't like the bumpy feel.

---------- Post added at 07:00 PM ---------- 6 hour anti-bump limit - Previous post was at 06:58 PM ----------

if manual pv6 n/a can go up to 220kmh++ depends on your balls

Suddenly I feel my car is a tortoise

 

[kurt_629]

I intend to let go my 19mm rear ARB. reason because I don't like the bumpy feel.

---------- Post added at 07:00 PM ---------- 6 hour anti-bump limit - Previous post was at 06:58 PM ----------



Suddenly I feel my car is a tortoise

You got pm :proud:

Anymore wanna sell?

 

[peeche]

like what?

i done my exhaust..
on 17' wheels,
change new set of absorber and spring, not coilover as still need to ferry in law.
added stiff ring.

like nothing much to do..

but i'm looking for anti roll bar, 19mm, rear.
TT to convert my 6A12 to turbo
unichip, emanage if anyone selling, let me know..

get a manual gearbox code : 222
custom s/s extractor, 2.5 straight pipe (use evo / twin turbo tank), good muffler.
iriduim / platinum plugs + good plug cables
open pod filter
e-manage

try this setup 1st.
it will put a big smile on your face.

 

[kurt_629]

get a manual gearbox code : 222
custom s/s extractor, 2.5 straight pipe (use evo / twin turbo tank), good muffler.
iriduim / platinum plugs + good plug cables
open pod filter
e-manage

try this setup 1st.
it will put a big smile on your face.

what is manual gearbox code? I'm a manual, NA.
2.5 straight pipe already..
iridium spark plug..
drop in K&N

as for emanage, my mechanic also told me the same but for NA..i won't expect much gain; 10-15%..
supposedly 6A12 is around 150bhp.. after emanage, it will be 165bhp..

well, the cost is around rm2k for all, forget it