Opti-Coat™Pro : Lotus Esprit Come Back!

s1tl

1,000 RPM
Senior Member
Jul 13, 2010
1,237
1,019
713
Ipoh/KL


We have a pretty rare car on our hands this round. Its a vintage Lotus Esprit fully restored to factory standard. It was briefed by the owner himself that it was repainted by a very skillful painter and also the colour chosen was from the Aston Martin Vanquish! This is the 4th car the owner had us worked on. Well, lets begin.

Upon arrival, the car was parked in a semi covered area, whereby tree leaves, tree sap, and bird droppings were visible.

Without wasting time, we proceed to inspecting the paint. Its was almost mint but with some coarse finishing from the painters.

Some light contamination and also haziness on the clear coat.

The paint was not at its best state but its nothing major.

Zoom in and we spotted some keep swirls on the frontal part of the car.

Some minor uneven clear coat.

a deep scratch.

Another visible deep swirled area.

From far, these swirls are not very visible, but it doesn't mean we skip it.


We gave the car a wash, clay and immediately started on the paint correction.

So after the paint correction, we restored the colour and also removed all of the swirls.
|
A closer zoom in look on the paint condition.


The wheels were also repainted and it was a pain in the a** to clean. We manage to clean up all of them and got them coated.


As for the results.
 

s1tl

1,000 RPM
Senior Member
Thread starter
Jul 13, 2010
1,237
1,019
713
Ipoh/KL

s1tl

1,000 RPM
Senior Member
Thread starter
Jul 13, 2010
1,237
1,019
713
Ipoh/KL

s1tl

1,000 RPM
Senior Member
Thread starter
Jul 13, 2010
1,237
1,019
713
Ipoh/KL

Random Post Every 5 Minutes

The 1NZFE(T) project is completed , running stock boost from a Garett AR48 turbo (suspect it might be from a S13 CA18 or SR20 turbo) at 0.68-0.82 spike on gear change (the car is a Vios 1.5 Auto)

Quite satisfied with the result , but there is a problem , after tuning even with a super rich AFR like 10-11 & retarded ignition timing , it would knock on high load condition eg.uphill / upshot on full throttle at high rpm ...

It need a thicker headgasket I bring down the compression ratio...
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience