KE-70: 4K engine tuning..

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
Arghhh.. I GOT PROBLEM..

my 4K engine when i slow down in gear 2.. everything normal..

then i full throttle it, it goes jerking... do u think it was the clutch plate?

at 1st i thought it was this thing (refer pic) coz it was leaking fuel..

after change it, still d same..

any ideas?
 

Attachments

^pomen_GTR^

7,000 RPM
Senior Member
May 13, 2010
7,509
1,690
1,713
The Mines
time to upgrade the carbie :biggrin:
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
time to upgrade the carbie :biggrin:
u've read my mind.. haha..

still not satisfy 'playing' with the stock carb.. i think wanna maintain it for a few more months.. juz wanna know the highest potential of the carb..

i'll clean the carb & check spark plug 1st..

thanx guyz..

:biggrin:
 

BLANk

1,500 RPM
Senior Member
Dec 28, 2007
1,750
6,757
1,713
Sardine
www.zerotohundred.com
D7zul,if u want very good aka low fuel consumption & a little powah then u can consider

the megavalve aisan carby...hehe...




if u are those GK then better go for weber dgv/dgav dual barrel progressive carby or DCNF 36/40...

oh ya...forgot to tell u that u need to use the long reached spark plug for ur toyota 4K engine...due to the combustion chamber design...normal spark plug can be use but the umphh tarak~~



sry for the blur pichas...using lauya phone...
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
BLANk,

those carby plug & play ka?
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
changed my spark plug to a toyota genuine set (as per the box)..

and the jerking is gone.. awesome.. :top:

thanx BLANk..

this spark plug is highly recommended for 4K engine..

cost rm50 per set..

now can drive 60km/h in gear 5.. hohoho.. (if lazy to drop gear).. hehe

future upgrade.. CARBURETOR.. :biggrin:

 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
anyone knows what these wordings meant?
スピンアウト tu maknenye spin out
超 tu maknenye sangat/super
体感 tu maknenye feel/experience
so スピンアウト超体感 maknenye macam really/very very feel the spin out! :burnout:


Special thanx to doritezza for translating

:biggrin:
 

BLANk

1,500 RPM
Senior Member
Dec 28, 2007
1,750
6,757
1,713
Sardine
www.zerotohundred.com
changed my spark plug to a toyota genuine set (as per the box)..

and the jerking is gone.. awesome.. :top:

thanx BLANk..

this spark plug is highly recommended for 4K engine..

cost rm50 per set..

now can drive 60km/h in gear 5.. hohoho.. (if lazy to drop gear).. hehe

future upgrade.. CARBURETOR.. :biggrin:

glad to heard that the problem solve ya...

no problem la bang...im just share what i learn & know only...

this engine really rocks...easy to maintain & never fail me...:proud:

btw,ur 4k distributor is contact point 1 or electronic?
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
Its electronic already..

My dad change it a few months ago

Does ur car have problem starting? Mine did..

At 1st i thought it was d fuel filter.. Changed it already.. Still d same

Crank so long also wont start

A lil help :biggrin:
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
icic...

nope...one kick start...hehe

it happen during cold or hot engine?
both.. cold & hot..

i'd say.. ikut mood dia je.. nak start, dia start.. hehe..

any ideas?

---------- Post added at 04:01 PM ---------- 6 hour anti-bump limit - Previous post was at 03:59 PM ----------

if exhaust got leak, this thing could happen also.. right?
 

BLANk

1,500 RPM
Senior Member
Dec 28, 2007
1,750
6,757
1,713
Sardine
www.zerotohundred.com
adoi...i haven't experience this kinda problem before...so payah gak nak troubleshooting ni...happen for long time alrdy?

did u try to pump the acc pedal while cranking?before change the distributor got such problem?the current electronic dist is recon 1 or original denso frm halfcut?

as i knw if exhaust leak will lose powah,noisy & high fc...
 

D7zul

2,000 RPM
Senior Member
Thread starter
Feb 24, 2011
2,697
848
1,713
Shah Alam
unfortunately the distributor is a recond..

don't know how long it's been like that.. i just got this car 3 weeks ago from my dad..

still in 'restoration' stage :biggrin:
 

Random Post Every 5 Minutes

Hey petrol heads,
Toying with the idea of getting a peugeot 406.What japanese engine can i plonk in without changing the mountings?If not then my other option would be to BOT.If i do that would i need a standalone ECU or can i piggy bag with emanage or something similar.Hope some forumers or mechs who are familiar with these setup can advise me.thanks.
Ask a question, start a discussion or post something for sale!
Post thread

Online now

Enjoying Zerotohundred?

Log-in for an ad-less experience